Zenith E2130NN Manuel d'instructions

Pg 1 of 8©2010 Zenith Products Corp.MCS 9/13/2010IS2130-I4Assembly Instructions - Model 2130NN (Satin Nickel)Instrucciones de Ensamblado - Modelo Mod

Pg 2 of 8(H) 1 Rubber end cap with hole1 Cubierta terminal de caucho con orificio1 embout perforé en caoutchouc(I) 1 Large end cap1 Cubierta terminal

Pg 3 of 81.BJEFJNOTE:If your tub has a low ceiling (approximately68” from the top of the tub to the ceil-ing), use the short tapered tube inplace of t

Pg 4 of 82.EBPlace a wedge (J) (tapered or rounded endup) on one of the long tapered tubes (B)approximately half way down. Slide shallowwire shelf (E)

Pg 5 of 83.4.upper tube assemblyensamble del tubo superiorunité tubulaire supérieurelower tube assemblyensamble del tubo inferiorunité tubulaire infér

Pg 6 of 85.6.GDHGAHDSlide the plastic end cap with hole (H) onthe 1/2” tube (D). Place a T-cap (G) oneach end of the 1/2” tube (D). Deslice la cubiert

Pg 7 of 87.If needed the height may be reduced bycarefully cutting the short tapered tube.Remove 1” for each inch that your ceilingis lower than 7’8”.

Pg 8 of 8If needed the height may be reduced bycarefully cutting the short tapered tube.Remove 1” for each inch that your ceilingis lower than 7’8”.Si