Zenith L15V26C Manuel d'instructions télécharger pdf (Page 25)

Auto Programming: Finding/Erasing Channels

206-3839-01

BASIC

FEATURES

- For Auto program to work, the programming source must be connected to the TV and the TV must be

receiving programming signals either over-the-air or from a cable-type service provider.

Press the a.prog or volume (

)

buttons to begin the channel search.

- When the channel search is complete, use the channel (

) buttons to review the memorized

channels.

- If you press the enter (

) button in auto programming, the function will stop and only channels

programming up to that time will remain.

- Auto programming function can memorize only the channels which are being received at that

time.

Channel Search (Auto Programming)

Press the a.prog button on the remote

control.

● Wait for auto program to complete the

channel search cycle before choosing a

channel. The TV scans for over-the-air

channels and then channels provided by a

cable service.

Auto program

Auto program TV 63

34%

Stop :

Channel number being

memorized is displayed.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Pas de commentaire

Zenith L15V26C Manuel d'instructions Page 25